Description
Hyperion quality products!
The Hyperion Ultimate PDB Power Hub with STOSD8 has been designed as an all in one power source . It can power all the devices on your platform from a single input. It acts as a multifunctional HUB and made from 4 layered PCB. Specially made for the mini FPV Quads. Small size no extra wiring needed. The 12V BEC is linear regulated, no LC Filter needed. Built-in STOSD8 support. Totally Plug & Play, no complicated settings needed.
Features:
- 3-5s lipo support
- Built-in STOSD8 tool
- Plug & play
- Compact and light, perfect for Mini and micro fpv quads
PDB (ESC outputs):
- Continuous current: 30A per output
- Peak current (10 seconds/minute): 35A per output
BEC 5V outputs:
- Designed for RC Receivers, Flight controllers, OSD, and Servos
- DC/DC synchronous buck regulator
- Voltage: 5.0 +/- 0.1VDC
- Continuous current: 2 Amps (Max.2.5A 10s/minute)
- Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)
- Short-circuit tolerant (5 seconds/minute)
BEC 12V outputs:
- Linear regulator, very low noise
- Designed for Video TX or FPV camera
- Voltage: 12.0 +/- 0.3VDC (4~5S operation)
- Continuous current: 500mA@16V IN, 400mA@20V IN
- Short-circuit tolerant (2 seconds/minute)
- If the battery is 3S LiPo, Output voltage=3S LiPo voltage – 1V
Current Sensor 140A:
- If current >140A. STOSD display 140A
LED indicator function:
- Blue LED blinks: STOSD is initializing
- Blue LED constant: STOSD is working
Included with the package:
- HUBOSD x 1
Specifications:
- Input voltage range (3S-5S lipo): 8 – 21VDC
- PDB: 4x30A (Max.4x35A)
- Regulated 5V and 12V outputs
- Current Sensor 140A
- Built-in STOSD8
- 2oz copper, 4-layered 1.6mm PCB
- 1x Battery input, 4x ESC outputs. 2x BEC 5V outputs, 2x BEC 12V outputs
- Camera signal & Gnd pads, Video Transmitter Signal & Gnd pads
- 1x Serial port (RX, TX, G)
- Dimensions: 46x36x4mm
- Weight: 8.5g
- Mounting holes 30.5mm square spacing,?3mm
Explore more from our collection.
Reviews
There are no reviews yet.